Daily protection of shot blasting machine accessories:
1. Check whether there are sundries falling into the machine, and remove them in time to prevent the blockage of each conveying link and cause equipment failure.
2. Before the shot blasting machine manufacturer operates, check whether the screws of the shot blasting machine accessories are tightened.
3. Before working, check the wear of the wearing parts such as guard plates, blades, impellers, rubber curtains, directional sleeves, rollers, etc. twice every shift, and replace them in time.
4. Check the coordination of the moving parts of the electrical appliance, check whether the bolt connection is loose, and tighten it in time.
5. The oil filling point of the shot blasting machine equipment regularly checks whether the oil filling of the spare part meets the regulations.
Generally speaking, the wearing parts and wear-resistant parts of shot blasting machine are made of high-chromium wear-resistant cast iron. In terms of service life, the service life of the blade is more than 500 hours, the service life of the side plate and the top plate is at least 800 hours, the service life of the end plate is 1200 hours, the service life of the directional sleeve pelletizing wheel is 1800 hours, and the service life of the main engine room is 1800 hours. There is no problem with the protective plate of the shot blasting machine within a year, some shot blasting machine equipment is still in good condition even after more than 2 years of use, and some shot blasting machine parts are severely worn after 3 or 4 months of use.